Compatibility
Acetaldehyde | |
Acetic Acid, 37% | |
Acetic Acid, Glacial | |
Acetic Anhydride | |
Acetone | |
Acetonitrile | |
Acetylene | |
Acrolein | |
Acrylic Acid | |
Acrylonitrile | |
Acetylene | |
Acrolein | |
Acrylic Acid | |
Acrylonitrile | |
Air | |
Alum | |
Aluminum Acetate | |
Aluminum Hydroxide | |
Aluminum Nitrate | |
Aluminum Sulfate | |
Amines | |
Ammonia, Gas>150°F | |
Ammonia, Gas<150°F | |
Ammonia, Liquid, Anhydrous | |
Ammonium Bisulfate | |
Ammonium Chloride | |
Ammonium Hydroxide | |
Ammonium Nitrate | |
Amyl Chloride | |
Aniline, Aniline Oil | |
Aqua Regia | |
Arsenic Acid | |
Asphalt | |
Aviation Fuels | |
Baking Soda | |
Barium Chloride | |
Beer | |
Benzaldehyde | |
Benzene (Benzol) | |
Benzoic Acid | |
Benzoyl Chloride | |
Benzyl Alcohol | |
Black Sulfate Liquor > 350 F | |
Black Sulfate Liquor < 350 F | |
Bleach Solutions | |
Boiler Feed Water | |
Borax | |
Boric Acid | |
Brine | |
Butadiene | |
Butane | |
Butanone-2 | |
Butyl Acetate | |
Butyl Alcohol (Butanol) | |
Butyl Methacrylate | |
Butylene (Butene) | |
Butyric Acid | |
Calcium Bisulfite | |
Calcium Carbonate | |
Calcium Chloride | |
Calcium Hydroxide | |
Calcium Hypochlorite | |
Calcium Nitrate | |
Caprolactam | |
Carbon Dioxide, dry | |
Carbon Dioxide, wet | |
Carbon Disulfide | |
Carbon Monoxide | |
Carbon Tetrachloride | |
Caustic Soda (NaOH) | |
Chlorine (wet) | |
Chlorine Dioxide | |
Chlorine, gas (dry) * | |
Chlorobenzene | |
Chloroethane | |
Chloroethylene | |
Chloroform | |
Chromic Acid | |
Citric Acid | |
Coal Gas | |
Copper Sulfate | |
Corn Oil | |
Cotton Seed Oil | |
Creosote (Coal Tar) | |
Cresol | |
Crude Oil | |
Cumene | |
Cyclohexane | |
Cyclohexanone | |
Detergent Solutions | |
Diacetone Alcohol | |
Diazomethane | |
Dibenzyl Ether | |
Dibutylamine | |
Dichlorobenzene-1,4 | |
Dichlorobenzidene | |
Dichlorobenzidene-3,3 | |
Dichloroethyl Ether | |
Dichloroethylene-1,1 | |
Dichloromethane | |
Diesel Fuel | |
Diethyl Carbonate | |
Dimethyl Acetamide | |
Dimethylformamide (DMF) | |
Dioxane | |
Dowtherm A, E | |
Epichlorohydrin | |
Ethane | |
Ethyl Acetate | |
Ethyl Alcohol (Ethanol) | |
Ethyl Ether | |
Ethylbenzene | |
Ethylchloride | |
Ethylene | |
Ethylene Dichloride (EDC) | |
Ethylene Glycol | |
Ethylene Oxide | |
Fatty Acids | |
Ferric Chloride | |
Ferrous Chloride | |
Fluorine (Gas, Liquid) | |
Formaldehyde | |
Formic Acid | |
Freon (See Refrigerants) | |
Fuel Oil | |
Fuming Sulfuric Acid, Oleum | |
Gas - Natural | |
Gasoline | |
Glucose | |
Glycerine (Glycerol) | |
Glycol | |
Green Sulfate Liquor | |
Heptane | |
Hexane | |
Hydraulic Oil (mineral) | |
Hydraulic Oil (phos. ester) | |
Hydrazine | |
Hydrochloric Acid, 30% | |
Hydrochloric Acid, Conc | |
Hydrofluoric Acid > 150 F | |
Hydrofluoric Acid < 150 F | |
Hydrogen | |
Hydrogen Chloride (dry) | |
Hydrogen Fluoride (HF) | |
Hydrogen Peroxide, 10% | |
Hydrogen Sulfide (dry) | |
Hydrogen Sulfide (wet) | |
Hydroquinone | |
Iodine | |
Isobutane | |
Isooctane | |
Isopropyl Alcohol | |
Jet Fuel | |
Kerosene | |
Lacquer Solvents | |
Lactic Acid | |
Liceed Oil | |
Lubricating Oil | |
Magnesium Chloride | |
Magnesium Hydroxide | |
Magnesium Sulfate | |
Maleic Acid | |
Maleic Anhydride | |
Mercuric Chloride | |
Mercury | |
Methane | |
Methyl Alcohol (Methanol) | |
Methyl Ethyl Ketone MEK | |
Methyl Isobutyl Ketone | |
Methyl Isocyanate | |
Methyl Methacrylate | |
Methylacrylic Acid | |
Methylene Chloride | |
Milk | |
Mineral Oil | |
Muriatic Acid | |
n-Butyl Amine | |
Naphtha | |
Naphthalene | |
Natural Gas | |
Nickel Sulfate | |
Nitric Acid, > 20% | |
Nitric Acid, < 50% | |
Nitrogen | |
Nitrogen Dioxide | |
Nitrogen Tetroxide | |
Octane | |
Oil, Crude | |
Oil, Mineral | |
Oleic Acid | |
Oleum, fuming H2SO4 | |
Oxalic Acid | |
Oxygen, gas | |
Oxygen, liquid* | |
Ozone | |
Paraffin | |
Pentane | |
Perchloroethylene | |
Petroleum | |
Phenol | |
Phosphoric Acid, <40% | |
Phthalic Acid | |
Phthalic Anhydride | |
Polyacrylonitrile | |
Potash | |
Potassium Chloride | |
Potassium Dichromate | |
Potassium Hydroxide | |
Potassium Nitrate | |
Potassium Sulfate | |
Propane | |
Propylene | |
Pydrauls, Skydrols | |
Pyridine | |
Red Sulfite Liquor | |
Red Sulfite Liquor > 380 F | |
Refrigerant Blend 404a | |
Refrigerant Blend HP 62 | |
Refrigerant Blend HP80 | |
Refrigerant Blend HP81 | |
Refrigerant HCFC 123 | |
Refrigerant HCFC 124 | |
Refrigerant R-11 | |
Refrigerant R-113 | |
Refrigerant R-12 | |
Refrigerant R-22 | |
Sea Water | |
Silver Nitrate | |
Soap Solutions | |
Soda Ash | |
Sodium Bicarbonate | |
Sodium Carbonate | |
Sodium Chloride | |
Sodium Hydroxide | |
Sodium Hypochlorite | |
Sodium Nitrate | |
Sodium Silicate | |
Sodium Sulfate | |
Sour Crude Oil | |
Soybean Oil | |
Steam (over 450 F) | |
Steam (to 450 F) | |
Stearic Acid | |
Stoddard Solvent | |
Styrene | |
Sulfite Liquors | |
Sulfur (molten) | |
Sulfur Dioxide | |
Sulfuric Acid, 20% | |
Sulfuric Acid, Conc. | |
Sulfuric Acid, Conc. > 200 F | |
Tar | |
tert-Butyl Amine | |
Tetrachloroethane | |
Tetrahydrofuran (THF) | |
Toluene | |
Transformer Oil | |
Transmission Fluid | |
Trichloroethane -1,1,2 | |
Trichloroethylene | |
Triethanolamine | |
Turpentine | |
Urea | |
Varsol | |
Vegetable Oil | |
Vinegar | |
Vinyl Acetate | |
Vinyl Chloride | |
Water | |
Whiskey and Wines | |
White Spirit | |
White Sulfate Liquor | |
Xylene | |
Zinc Chloride | |
Zinc Nitrate | |
Zinc Sulfate |
Resistant | |
Not Resistant |
Durlon® 9200 is a barium sulfate filled PTFE designed for use in piping and equipment in chemical, pulp & paper and associated industries where resistance to aggressive chemicals and excellent sealability is required. Due to our unique and innovative manufacturing process, Durlon® 9200W has outperformed all layered filled PTFE materials proving to be more resistant to the “popcorning” effects of aggressive monomers such as styrene, methyl methacrylate and butyl acetate.
Typical Physical Properties
Color | Granite White (standard) |
Fiber | Barium Sulfate |
Binder | Pure PTFE |
Fluid Services | Steam, nitric acid, TiO2, ClO2, H2O2, liquors, sulfur dioxide, brown stock, phosphoric acid |
Density | 2.5 g/cc (156 lbs/cu. ft) |
Tensile Strength, ASTM F152 | 1,920 psi (13.2 MPa) |
Compressibility, ASTM F36 | 8 to 16% |
Recovery, ASTM F36 | 35% |
Temperature Range Continuous, max |
-350 to 520°F 500°F |
Pressure, max | 1,500 psig |
Leakage, DIN 3535 | 0.01 cc/min |
Creep Relaxation, ASTM F38 | 30% |