Durlon® Joint Sealant

A highly fibrillated expanded PTFE form-in-place sealant for gasketed joints. Supplied on spools, it is not dependent on flange dimensions. Durlon® Joint Sealant comes in various thicknesses with a high quality adhesive backing to ease in installation and is ideal for worn flanges of all sizes. It exhibits flexibility, compressibility, stability under high temperature and high tensile strength. Durlon® Joint Sealant is chemically inert and resists creep relaxation to maintain a tight seal. Durlon® Joint Sealant conforms to FDA requirements. Durlon® Joint Sealant is easily cut with scissors to the correct length. The adhesive backing holds the sealant in place while position around the flange inside the bolt circle to isolate the flow media. The ends should overlap 3/4″ to 1″ on either side of a bolt to ensure leak-tight performance. It is recommended to use a size about 40-50% of the sealing surface.

Composition:

Durlon® Joint Sealant is made with only 100% pure PTFE resins and exhibits the same chemical resistance of virgin PTFE.

 

Typical Physical Properties:

Colour White
Temperature
Min
Max
-240°C (-400°F)
316°C (600°F)
Density, g/cc (lbs/ft3) 0.85 (53)
Compressibility, %
ASTM F36
72
Creep Relaxation, %
ASTM F38
25
Sealability, cc/min
ASTM F2378 (Nitrogen)
0.05

*ASTM Testing